PID Control for a Two-Axis Orientable Solar Panel System


Autores/as

DOI:

https://doi.org/10.22517/23447214.22221

Palabras clave:

OSPS, PID-CTC, Nichols-Ziegler, 2nd method

Resumen

The control of a two degree-of-freedom Orientable Solar Panel System-OSPS was simulated for a control scheme that combines Proportional, Integral and Derivative actions with a computed torque control inner loop. The latter controller calculates the torques at the joints. Two plants of the dynamic model of the OSPS were evaluated: analytical and Simmechanics. Three case motions were simulated: random, to a sef position, and end-of-the-day cycle. Controller gains were set by using the sustained oscillation Nichols-Ziegler second syntonization method. It was found that in order to save energy along the motion the non-underdamped behavior is required. This is attained by setting the integral component gain to zero. Very small maximum theoretical position errors of the azimuth and elevation position angles suggest that the combination PD-CTC scheme is satisfactory for controlling the OSPS motion along day

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Javier Roldán Mckinley, Programa de Ingeniería Mecánica Universidad del Atlántico

Profesor Asociado

Programa de Ingeniería Mecánica

Universidad del Atlántico

Descargas

Publicado

2019-12-30

Cómo citar

Roldán Mckinley, J., Fernández Pizarro, A., & Beltrán González, J. (2019). PID Control for a Two-Axis Orientable Solar Panel System. Scientia Et Technica, 24(4), 581–589. https://doi.org/10.22517/23447214.22221

Número

Sección

Mecánica