Design Methodology and modeling of a drive mechanic


Authors

  • Hernán Darío Patiño Duque Universidad Tecnológica de Pereira
  • Luis Miguel Lopez Posada Universidad Tecnológica de Pereira
  • Eduardo Santos Mosquera Angulo Universidad Tecnológica de Pereira

DOI:

https://doi.org/10.22517/23447214.12801

Keywords:

Drive, belts (trapezoidal), step, transmission ratio.

Abstract

This work presents a methodology for the design and
modeling of a mechanical drive for a jackhammer and a belt
conveyor. Initially it is described the different systems of power
transmission of which this is composed, giving a perspective of the
transforming means movements. Subsequently the electric motor
selection is made and the equations are show for calculating for
different steps (belt transmissions, chain sprockets and wheels).
The results or parameters obtained must be standardized using
commercial catalogs to then reach a possible construction of the
drive. Finally the assembly drawings and the exploded views of the
elements that compose the system are made in a software of
modeling 3D.

Downloads

Download data is not yet available.

Author Biographies

Hernán Darío Patiño Duque, Universidad Tecnológica de Pereira

Estudiante de Ingenieria Mecánica semestre X

Luis Miguel Lopez Posada, Universidad Tecnológica de Pereira

Estudiante de Ingenieria Mecánica semestre IX

Eduardo Santos Mosquera Angulo, Universidad Tecnológica de Pereira

Profesor jubilado de la Universidad Tecnológica de Pereira

Facultad de Ingeniería Mecánica

Downloads

Published

2017-03-30

How to Cite

Patiño Duque, H. D., Lopez Posada, L. M., & Mosquera Angulo, E. S. (2017). Design Methodology and modeling of a drive mechanic. Scientia Et Technica, 22(1), 24–33. https://doi.org/10.22517/23447214.12801

Issue

Section

Mecánica