Microstructural behavior of a pure magnesium casting with solidification temperature control.
DOI:
https://doi.org/10.22517/23447214.14281Keywords:
Casting, Pure magnesium, Microstructure, Solidification.Abstract
The study of the microstructural behavior of pure magnesium (Mg) after a casting process conducted in a furnace of own manufacture with controlled atmosphere and solidification temperature control is presented. This study aimed to determine the change in the composition of the Mg by SEM/EDS, owing to the protective atmosphere used. Besides, the change in the microstructure of Mg was studied by performing solidification in a mold at temperature of 200°C within the casting system, in which a poor oxygen atmosphere was used with a mixture of CO2 and SF6. Through the compositional evaluation was evident a change in the material owing to the gases used and the elements that interacted with the Mg. It was possible to see a change in the microstructure of the Mg by optical microscopy analysis and SEM, observing differences in the amount and distribution of particles and inclusions present in the Mg. After casting process, the generation of a dendritic structure was observed, but not in the base material. Finally, using the manufactured casting system was possible to obtain an ingot of Mg with similar conditions to the base material, in addition to obtain a microstructure with finer grain and better distribution of particles in the matrix.Downloads
Downloads
-
Vistas(Views): 962
- PDF (Español (España)) Descargas(Downloads): 975
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.