Virtual prototype and cosimulation applied to a 3 DOF Delta Parallel Manipulator for Kinematics & Kinetics Behavior Studies
DOI:
https://doi.org/10.22517/23447214.16511Keywords:
kinematics, kinetics, NI LabVIEW, NI Softmotion, SolidWorks, Parallel manipulator, Virtual prototype.Abstract
This work presents the kinetics and kinematics analysis for delta-3 parallel manipulator. Kinematics and Kinetics validation was performed with a virtual prototype cosimulation using Solidworks and Labview and considering experimental data from physical prototype testing. In respect to the same testing path, comparisons of kinematics results from physical prototype against data of both virtual prototype and theoretical model, corroborate that positions of mobile platform have similar values in respect to the global coordinate system. On the other hand, actuator torques of theoretical model and virtual prototype reported conservative behaviors, whereas the torque of the physical prototype presents lower requirements under the same conditions. Work in unison of these computational tools allows a coherent study of mechanical systems and a direct comparison of the theoretical model, physical prototype and virtual prototype.Downloads
Downloads
-
Vistas(Views): 487
- PDF (Español (España)) Descargas(Downloads): 373
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.