Design of a fatigue test bench in rotary flexion to evaluate the behavior to cyclical loads


Authors

DOI:

https://doi.org/10.22517/23447214.16891

Keywords:

Fatigue, rotary flexion, mechanical design, Ibagué, norm ASTM E-466.

Abstract

The development of this article shows the process of design, construction and start-up of a fatigue machine in rotary flexion. Fatigue is a subject of considerable relevance and requires adequate equipment for its study, therefore it is sought to contribute to educational and research growth through the development of a functional fatigue machine and where a variety of materials can be studied. The main results were the development of a machine that can carry out a totally inverted stress of 977 Mpa, therefore it can arrive to study steels of high resistance. This machine follows the standards of the normative ASTM E-466 regarding the dimensions of the test specimen. The design of the machine is divided into 3 systems, mechanical system, electrical system and electronic system. When joining these systems obtained a functional and autonomous machine where can make serious and reliable investigations.

Downloads

Download data is not yet available.

Author Biographies

Oscar Javier Araque de los Rios, Universidad de Ibagué

Profesor Asociado del programa de Ingeniería Mecánica en la Universidad de Ibagué, es graduado y especialista en Mecánica de Materiales de la misma Universidad, Magister en Mecánica Aplicada de la Universidad de Cienfuegos Cuba, Doctor en Ingeniería Ciencia y Tecnología de Materiales en la Universidad Nacional de Colombia

Santiago Quintana Avila, Universidad de Ibagué

Ingeniero Mecánico Graduado de la Universidad de Ibagué

Downloads

Published

2018-09-30

How to Cite

Araque de los Rios, O. J., & Quintana Avila, S. (2018). Design of a fatigue test bench in rotary flexion to evaluate the behavior to cyclical loads. Scientia Et Technica, 23(3), 324–333. https://doi.org/10.22517/23447214.16891

Issue

Section

Mecánica