Caracterización experimental de paneles compuestos elaborados con fibras de Arundo Dónax y resina vegetal

Martha Lissette Sánchez Cruz; David Esteban Baquero Bastos; Jonathan Monsalve Alarcón

doi:10.22517/23447214.17041

Experimental characterization of composite panels made with Arundo Dónax fibers and vegetable resin

Authors

Martha Lissette Sánchez Cruz Universidad Militar Nueva Granada https://orcid.org/0000-0002-4718-0569
David Esteban Baquero Bastos Universidad Militar Nueva Granada https://orcid.org/0000-0003-4472-5620
Jonathan Monsalve Alarcón Universidad Militar Nueva Granada https://orcid.org/0000-0003-1738-7312

DOI:

https://doi.org/10.22517/23447214.17041

Keywords:

Arundo Dónax, panels, composites, properties

Abstract

Composite panels were elaborated with Arundo Dónax fibers randomly distributed in a vegetal resin. The fibers were extracted by mechanical means. For the elaboration of the panels a method of manual molding and compaction by pressing was used. The determination of the physical properties was focused on the evaluation of the absorption capacity, the density and the percentage of swelling. To evaluate the mechanical performance tensile, compression and static bending tests were performed. The influence of the percentage of fibers in the behavior of the material was analyzed. The results were compared with results available in the literature for commercial panels

Downloads

Download data is not yet available.

Downloads

Vistas(Views):

PDF (Español (España)) Descargas(Downloads): 596

Published

2018-03-30

How to Cite

Sánchez Cruz, M. L., Baquero Bastos, D. E., & Monsalve Alarcón, J. (2018). Experimental characterization of composite panels made with Arundo Dónax fibers and vegetable resin. Scientia Et Technica, 23(1), 119–125. https://doi.org/10.22517/23447214.17041

Download Citation

Issue

Vol. 23 No. 1 (2018)

Section

Bioingeniería

License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The undersigned authors declare that the article submitted to the journal Scientia et Technica is an original work and that all its content is free of third-party copyright restrictions or has the corresponding authorizations. Consequently, the authors assume responsibility for any litigation or claim related to intellectual property rights, releasing the Technological University of Pereira and the journal Scientia et Technica from any liability.

If the submitted work is accepted for publication, the authors retain copyright to the article and grant the journal Scientia et Technica the right of first publication, as well as a non-exclusive, perpetual license to reproduce, edit, distribute, display, and publicly communicate the article in any medium or format, including print, electronic, databases, repositories, the Internet, or other scientific dissemination systems. The authors agree that the article will be published in open access and distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

The journal Scientia will respect in all cases the moral rights of the authors, in accordance with the provisions of article 30 of Law 23 of 1982 of the Republic of Colombia, recognizing the authorship of the work, the right to integrity and the right of disclosure, which are inalienable and non-waivable.