Design of a charge regulator for application in an isolated micro grid with photovoltaic generation


Authors

DOI:

https://doi.org/10.22517/23447214.18081

Keywords:

MPPT algorithm, SEPIC converter, micro grid, photovoltaic system.

Abstract

This paper presents the design of a charge regulator operating in an isolated micro grid with photovoltaic generation. The converter selected for this application is a SEPIC with a MPPT algorithm for the cases in which the energy demand is greater than the energy available. The algorithm is able to modify its point of maximum power, in order to perform the recharging and supply of power to the battery bank of the system (isolated microgrid) and a group of charges set at a level of determined of voltage. Finally, the results of the tests carried out are presented and the conclusions are given.

Downloads

Download data is not yet available.

Author Biographies

Luís Miguel Gómez Paez, Universidad Distrital Francisco José de Caldas

Ingeniero de Proyectos

Wilmer Eduardo Guacaneme Muñoz, Universidad Distrital Francisco José de Caldas

Ingeniero Eléctrico.

Andrés Felipe Rodriguez Benavides, Universidad Distrital Ffrancisco José de Caldas

Ingeniero Eléctrico.

Francisco Santamaría Piedrahita, Universidad Distrital Francisco José de Caldas

Profesor Asociado Planta

Cesar Leonardo Trujillo Rodríguez, Universidad Distrital Francisco José de Caldas

Profesor Titular Planta

References

[1]. M. Malinowski, J. I. Leon and H. Abu-Rub, “Solar Photovoltaic and Thermal Energy Systems: Current Technology and Future Trends,” in Proceedings of the IEEE, vol. 105, no. 11, pp. 2132-2146, Nov. 2017.doi: 10.1109/JPROC.2017.2690343.

[2]. R. V. Maglin J.R, “Design and Analysis of SEPIC Converter Based MPPT,” Journal of Electrical Engineering & Technology, vol. 9, pp. 742-749, 2014.

[3]. S. Kundu, N. Gupta and P. Kumar, “Review of solar photovoltaic maximum power point tracking techniques,” 7th India International Conference on Power Electronics (IICPE), Patiala, 2016, pp. 1-6. doi: 10.1109/IICPE.2016.8079494

[4]. EnerNaval, Reguladores de carga solar, Epaña, 2011. www.enernaval.es/PDF/Solar/Comparativa%20regul adores%20EnerNaval.pdf

[5]. M. Taghvaee, M. Radzi, S. Moosavain, H. Hizam y M. H. Marhaban, “A current and future study on nonisolated DC–DC converters for photovoltaic applications,” Renewable and Sustainable Energy Reviews, vol. 17, pp. 217-227, 2013.

[6]. J. M. Enrique, E. Duran, Sidrach-de-Cardona M, J. M. Andujar, M. A. Bohorquez and J. Carretero, “A new approach to obtain I-V and P-V curves of photovoltaic modules by using DC-DC converters,” Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005., Lake Buena Vista, FL, USA, 2005, pp. 1769-1772. doi: 10.1109/PVSC.2005.1488493

[7]. N. Penina, Y. V. Turygin and V. Racek, “Comparative analysis of different types of hybrid

electric vehicles,” 13th Mechatronika 2010, Trencianske Teplice, 2010, pp. 102-104.

Downloads

Published

2018-06-30

How to Cite

Gómez Paez, L. M., Guacaneme Muñoz, W. E., Rodriguez Benavides, A. F., Santamaría Piedrahita, F., & Trujillo Rodríguez, C. L. (2018). Design of a charge regulator for application in an isolated micro grid with photovoltaic generation. Scientia Et Technica, 23(2), 143–150. https://doi.org/10.22517/23447214.18081

Issue

Section

Eléctrica