Multibody approach Matlab GUI for kinematic and dynamic analysis of planar mechanisms
DOI:
https://doi.org/10.22517/23447214.18101Keywords:
multibody approach, planar mechanisms, GUI, Matlab-GUIDE, mechanism and machine designAbstract
The description and use of a Matlab programmed software with graphical interface created in GUIDE are presented in this paper. The report begins with the introduction of multibody approach fundamentals for planar mechanisms. Vector description of rigid elements, revolute and prismatic kinematic pairs, and rotatory or linear drivers (actuators) are presented with the set of the restriction equations. Numerical solution of the equations for both kinematics and dynamics of the mechanism elements is made with the Newton-Raphson algorithm. Sliding-crank four-link planar mechanism case study is used for familiarizing the user with the basic level multibody approach software that is introduced in the paper. The use of the software is painstakingly illustrated for the sliding-crank mechanism at every stage: definition of elements, joints, and actuators, followed by motion specification and the final visualization of the simulation results. A satisfactory validation is made by comparing the software findings against a SolidWorks simulation.
Downloads
Downloads
-
Vistas(Views): 706
- PDF Descargas(Downloads): 640
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.