Mechanical and environmental performance evaluation of a Spark Ignition Engine with high compression ratio fueled whit Biogas, Methane and Hydrogen blends
DOI:
https://doi.org/10.22517/23447214.22311Keywords:
Biogás, Gas Natural, Hidrógeno, Emisiones contaminantes.Abstract
Use of renewable fuels from sources other than fossils takes on importance as energy sources, such as biogas. Exclusive engines of biogas have a high economic cost, and little commercial availability for low powers. In this study, we used a compression ignition engine work as spark ignition. Mechanical and environmental performance of a stationary 1550 cm3, 20 kW@3000 rpm nominal power, 15.5:1 compression ratio, diesel engine converted to spark ignition is analyzed. The engine is coupled to a resistance bank simulating engine load by power generation. The engine was fixed at 1800 rpm at 4 kW, which corresponds to 57% of the engine load at a 0.852 bar atmospheric pressure in the Medellín city. The engine was fueled with methane (CH4) and carbon dioxide (CO2) mixtures in order to simulate at common biogas composition (60% CH4 - 40% CO2), and enriched biogas (70% CH4 - 30% CO2 y 80% CH4 - 20% CO2). Hydrogen was added in small amounts (0%, 5%, 10% and 15% on volumetric basis). The addition of hydrogen enhances the combustion rates, extends the flammability limits, and contributes to the reduction greenhouse gases like CO2 and pollutants such as CO and unburned hydrocarbons. However, hydrogen increases NO and NO2 emissions. It was found that the addition of 15% hydrogen improves the combustion properties when using a lean fuel mixture, relative equivalence ratio of 0.822 for pure biogas, while for biogas-hydrogen mixtures no significant improvements in the mechanical and environmental behavior of the engine were found.
Downloads
Downloads
-
Vistas(Views): 424
- PDF (Español (España)) Descargas(Downloads): 474
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.