Analysis of the microstructural influence by laser cutting velocity

Análisis de la afectación microestructural debida a la velocidad de corte con láser


Authors

DOI:

https://doi.org/10.22517/23447214.23371

Keywords:

Láser CO2, velocidad de corte

Abstract

This research evaluates the influence of the CO2 laser cutting velocity in the heat-affected zone in a low- carbon steel. The control of laser cutting parameters is essential to ensure that the properties required in the material have not been affected, and avoid additional grinding processes on the cut surfaces. Morphologic, mechanic and microstructural tests were used to prove the influence of cutting process and its velocity on heat-affected zone. Transformation from ferritic into pearlitic structure and reduction in grain size were analyzed. Also, was evaluated a rise in hardness due to phase transformation. Better cutting conditions were evidenced in samples using a cutting velocity of 80 mm/s because the mean hardness obtained allow infer a good relation of properties and a smaller heat affected zone.

Downloads

Download data is not yet available.

Author Biography

Rodolfo Rodríguez Baracaldo, Universidad Nacional de Colombia, Sede Bogotá.

Profesor Asociado, Departamento de Ingeniería Mecánica y Mecatrónica Grupo Investigación: Innovación en Procesos de Manufactura e Ingeniería de Materiales (IPMIM).

Downloads

    Vistas(Views): 252
  • PDF Descargas(Downloads): 189

Published

2020-12-30

How to Cite

Rodríguez Baracaldo, R., López Camargo, M., & Martin-Buitrago, A. (2020). Analysis of the microstructural influence by laser cutting velocity: Análisis de la afectación microestructural debida a la velocidad de corte con láser. Scientia Et Technica, 25(4), 513–518. https://doi.org/10.22517/23447214.23371

Issue

Vol. 25 No. 4 (2020)

Section

Mecánica

License

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.