Efecto de la temperatura de revenido en las propiedades microestructurales, cristalográficas y resistencia al desgaste del acero ASI/SAE 1045
Effect of Tempering Temperature on Microstructural, Crystallographic and Wear Resistance Properties of ASI / SAE 1045 Steel
DOI:
https://doi.org/10.22517/23447214.23731Keywords:
AISI/SAE 1045, ASTM G99, pin-on-diskAbstract
In this work, the effect of tempering temperature on the microstructural, crystallographic and wear properties of AISI / SAE 1045 steel is analyzed. The samples were obtained by machining a 5/8 '' rod of AISI / SAE 1045 commercial steel, until obtaining cylindrical specimens with a diameter of 40 mm and 5 mm of thickness. These samples were subjected to thermal treatments of normalization, quenching and tempering, carried out at temperatures of 460 ° C, 507 ° C, 554 ° C and 600 ° C, in order to cover the range of tempering temperatures recommended by literature and steel manufacturers, for this material. In the adhesive wear test, a pin-on-disk tribometer was used to obtain the wear rate of the samples subjected to the different tempering conditions. The wear tracks were analyzed by means of scanning electron microscopy. The microstructure obtained in each heat treatment was analyzed by metallography studies. Likewise, hardness measurements were made at the different tempering conditions.
Downloads
Downloads
-
Vistas(Views): 728
- PDF (Español (España)) Descargas(Downloads): 428
- HTML (Español (España)) Descargas(Downloads): 301
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.