CARACTERIZACION DE LA TEXTURA SUPERFICIAL GENERADA EN PAREDES DE CILINDROS HIDRAULICOS POR BRUÑIDO


Authors

  • MILTON COBA SALCEDO

Abstract

Este documento proporciona una visión de las metodologías y parámetros usados en la caracterización de texturas superficiales en 2D y 3D, obtenidas por bruñido (honing y plateau-honing), como un primer paso para el modelado del proceso de mecanizado y el comportamiento funcional de la pared interna del cilindro hidráulico. Un estudio comparativo entres parámetros 2D y 3D ha sido realizado para establecer la posible correlación entre estos. Para reducir el número de experimentos, un estudio preliminar ha sido hecho sobre 18 muestras de cilindros con diferentes herramientas de bruñir.

Downloads

Download data is not yet available.

Downloads

Published

2006-08-17

How to Cite

COBA SALCEDO, M. . (2006). CARACTERIZACION DE LA TEXTURA SUPERFICIAL GENERADA EN PAREDES DE CILINDROS HIDRAULICOS POR BRUÑIDO. Scientia Et Technica, 2(31). Retrieved from https://ojs2.utp.edu.co/index.php/revistaciencia/article/view/6401

Issue

Vol. 2 No. 31 (2006)

Section

Mecánica

License

Copyright (c) 2017 Scientia et technica

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.