Construction of a bench for electro-pneumatic practices


Authors

  • Paolo Amato Hernández
  • Mario Camargo Ardila
  • Jhonatan Durán Bastidas
  • Carlos Pacheco Amell
  • Javier Roldán Mckinley Programa de Ingeniería Mecánica Universidad del Atlántico
  • Jovanny Duque

DOI:

https://doi.org/10.22517/23447214.9314

Keywords:

electroneumática, banco de pruebas, diseño, práctica de laboratorio

Abstract

—Construction criteria for an electro-pneumatic teaching bench are presented. A suitable work bench was obtained based on Ergonomics, load analysis and structural elements selection. Pneumatic circuit elements were modified to fit into the bench work area. The usefulness in the assembly for the created lab practices was highlighted, and complemented with audiovisual aids for both instructors and students.

Downloads

Download data is not yet available.

Author Biographies

Paolo Amato Hernández

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Mario Camargo Ardila

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Jhonatan Durán Bastidas

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Carlos Pacheco Amell

Ingeniero Mecánico

Egresado de la Universidad del Atlántico

Javier Roldán Mckinley, Programa de Ingeniería Mecánica Universidad del Atlántico

Profesor Asociado

Programa de Ingeniería Mecánica

Universidad del Atlántico

Jovanny Duque

Profesor Programa de Ingeniería Mecatrónica

Instituto Tecnológico de Soledad, Atlántico

Downloads

Published

2015-06-30

How to Cite

Amato Hernández, P., Camargo Ardila, M., Durán Bastidas, J., Pacheco Amell, C., Roldán Mckinley, J., & Duque, J. (2015). Construction of a bench for electro-pneumatic practices. Scientia Et Technica, 20(2), 119–128. https://doi.org/10.22517/23447214.9314

Issue

Vol. 20 No. 2 (2015)

Section

Mecánica

License

Copyrights

The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:

In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.

The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright.  Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.