Technical and economic assessment rate of Cooling welding using models FEM
DOI:
https://doi.org/10.22517/23447214.9350Keywords:
Análisis técnico económico, soldadura, enfriamiento.Abstract
The development of this research paper is focused on a comparison between the results obtained experimentally for the estimation of the rate of cooling water welded geometry T specimens made of structural steel ASTM HR A36 compared to analyzes using computational tools , particularly the software of the finite element modeling (FEM) ANSYS, the experimental test for type K thermocouples which capture the cooling temperature values obtained by the data acquisition cards are used, the analysis model required MEF the development of a more than 850,000 mesh nodes, the results of the comparative product analysis of the cooling rate, showing a difference between methods below 3%, which allows the computer to estimate as a reliable alternative when setting this type of analysis additionally the costs associated with the development of experimental tests vs MEF implementing models for the costs associated with this stage of experimentation are determined, it is established that the rate of recovery, just to test cooling is evaluated 15 months, but the versatility of this computational tool, allows you to explore other uses.Downloads
Downloads
-
Vistas(Views): 732
- PDF (Español (España)) Descargas(Downloads): 558
Published
How to Cite
Issue
Section
License
Copyrights
The journal is free open access. The papers are published under the Creative Commons Attribution / Attribution-NonCommercial-NoDerivatives 4.0 International - CC BY-NC-ND 4.0 license. For this reason, the author or authors of a manuscript accepted for publication will yield all the economic rights to the Universidad Tecnológica of Pereira free of charge, taking into account the following:
In the event that the submitted manuscript is accepted for publication, the authors must grant permission to the journal, in unlimited time, to reproduce, to edit, distribute, exhibit and publish anywhere, either by means printed, electronic, databases, repositories, optical discs, Internet or any other required medium. In all cases, the journal preserves the obligation to respect, the moral rights of the authors, contained in article 30 of Law 23 of 1982 of the Government Colombian.
The transferors using ASSIGNMENT OF PATRIMONIAL RIGHTS letter declare that all the material that is part of the article is entirely free of copyright. Therefore, the authors are responsible for any litigation or related claim to intellectual property rights. They exonerate of all responsibility to the Universidad Tecnológica of Pereira (publishing entity) and the Scientia et Technica journal. Likewise, the authors accept that the work presented will be distributed in free open access, safeguarding copyright under the Creative Commons Attribution / Recognition-NonCommercial-NoDerivatives 4.0 International - https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es license.